13
G
e
tti
n
g
started
VQT4Z38
You can adjust the height of the speakers with the Leg stands or Support legs.
If you place the speakers with the Leg stands, the speakers can be raised above the placement
surface.
1
Assemble the speakers.
2
Connect the speaker cables.
3
Attach the leg stands.
(Continued on the next page)
Place the speakers horizontally
Place the speakers using the leg stands
Red connector:
The speaker attached to the
red
connector cable is to be place on the
right
side.
White connector:
The speaker attached to the
white
connector cable is to be place on the
left
side.
Tighten the screw (supplied) securely.
Metal bracket
1
Thread the speaker cable through the hole in the
speaker.
2
Connect the speaker cables to the speakers. (
>
14)
3
After connecting the speaker cable, press the cable into
the groove.
* If you have difficulty inserting the cable, try straightening the speaker
cable and then bending the cable about 20 mm from the tip, at an angle
of approx. 45
o
.
Red
White
Align the higher or lower
holes with the projecting
parts on the speaker.
Tighten the screw
(supplied) securely.
Leg stand
SC-BTT230EB-VQT4Z38_mst.book 13 ページ 2013年3月19日 火曜日 午前9時27分