40
VQT4Z38
∫
Quick Start
Speed of startup from standby mode is increased.
≥
When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase so compared to when set to “Off”.
∫
Remote Control
Change the remote control code if other
Panasonic products react to this remote control.
∫
Firmware Update (
>
19)
Press [OK] to show the following settings:
¾
Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾
Update Now
You can update the firmware manually if a
firmware update is available.
∫
System Information
Press [OK] to show the following settings:
¾
Software Licence
Information about the software used by this unit
is displayed.
¾
Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
∫
Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
Volume (Channel balance)
∫
Adjusting speaker level
(Effective when playing multi-channel audio)
1
Select “Test” and press [OK].
A test signal is output.
2
While listening to the test signal
Press [
3
,
4
] to adjust the volume of
subwoofer (
).
The volume can be adjusted between
r
6 dB
to
s
6 dB.
3
Press [OK].
The test signal stops.
To finish the speaker setting
Press [
3
,
4
,
2
,
1
] to select “Complete” and
press [OK].
Speaker settings
Complete
Test
R
L
0
dB
SW
dB
0
SC-BTT230EB-VQT4Z38_mst.book 40 ページ 2013年3月19日 火曜日 午前9時27分