Getting s
tar
te
d
23
VQT3M06
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Internet Connection Test)
≥
Refer to the operating instructions of the hub or router.
≥
You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (
>
44)
≥
You can redo these settings individually using “Network Settings”. (
>
44)
≥
Do not use this unit or Wireless LAN adaptor to connect to any wireless
network for which you do not have usage rights.
During automatic searches in a wireless network environment, wireless
networks (SSID) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
≥
After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router might change.
When you have trouble getting online on your PC, perform the network
settings on your PC in accordance with the settings of Wireless router.
≥
Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
Display
Check the
following
1. LAN cable connection or
Wireless Settings
:Fail
≥
Connection of
the LAN
cables (
>
19)
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Wireless Settings
:Pass
≥
Connection
and settings
of the hub
and router
≥
Settings of
“IP Address /
DNS
Settings”
(
>
45)
2. IP address setting
:Fail
3. Connection to gateway
:Fail
1. LAN cable connection or
Wireless Settings
:Pass
2. IP address setting
:Pass or
Home
network
available
3. Connection to gateway
:Fail
Display
Check the following
Cannot find the server.
(B019)
≥
“Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (
>
45)
Failed to connect to the
server.
(B020)
≥
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
≥
Settings of “Proxy Server
Settings” (
>
45) and the router.
OK
Network Easy Setting (Home Network Connection Check)
Yes
No
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK]
to finish Network Easy Setting.
: Fail
: Fail
: Fail
OK
Network Easy Setting (Internet Connection Test)
Complete.
- Connection to the Internet : Fail(B019)
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
SCBTT775_770_370_270EBEPGN_VQT3M06.book 23 ページ 2011年1月18日 火曜日 午後6時14分