26
VQT3M06
Enjoying sound effects
from all speakers
1
Press [SURROUND] several times to select
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
MANUAL
≥
The selected effect will only be displayed on the main
unit.
2
While “MANUAL” is displayed, press
[
2
,
1
] and select the desired effect.
DOLBY PRO LOGIC II MOVIE
Suitable for movie software, or the one recorded in Dolby
Surround.
(except DivX)
DOLBY PRO LOGIC II MUSIC
Adds 5.1-channel effects to stereo sources.
(except DivX)
7.1CH VIRTUAL SURROUND
You can enjoy 6.1/7.1-channel surround-like effect using
5.1-channel speakers.
SUPER SURROUND
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be output to
the front speakers and the subwoofer only.
≥
When you set to “7.1CH VIRTUAL SURROUND”,
“SUPER SURROUND” and “2CH STEREO”, “Cinema
Surround Plus” (
>
41)
is not activated.
∫
Adjusting speaker level during play
1
Press and hold [
j
CH SELECT] to activate the speaker
setting mode.
2
Press [
j
CH SELECT] several times to select the speaker.
Each time you press the button:
* When the optional surround back speakers are connected.
L R: Front speaker
(left and right: only the balance is adjustable.)
≥
Press [
2
,
1
] to adjust the balance of the front
speakers.
C: Centre speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
SW: Subwoofer
≥
The channels not included in the playing audio will not
be displayed (subwoofer is displayed even if it is not
included).
3
Press [
3
] (increase) or [
4
] (decrease) to adjust the
speaker level for each speaker.
s
6 dB to
r
6 dB
∫
Changing the sound modes
1
Press [SOUND] several times to select the mode.
≥
The selected mode will only be displayed on the main
unit.
2
While the selected mode is displayed
Press [
2
,
1
] and select the desired setting.
EQUALIZER
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
CLEAR
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL
You can adjust the amount of bass.
1
(Weakest effect) to
4
(Strongest effect)
≥
The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics of
your room are not optimal.
≥
The setting you make is retained, and recalled every
time you play from the same type of source.
CENTER FOCUS
(Effective when playing audio containing centre
channel sound.)
You can make the sound of the centre speaker seem like
it is coming from within the TV.
WHISPER-MODE SURROUND
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
≥
The sound effects/modes may not be available or have no effect with some
sources.
≥
You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
Enjoying surround sound
effects
L R
C
RS
RB
*
LB
*
LS
SW
SCBTT775_770_370_270EBEPGN_VQT3M06.book 26 ページ ２０１１年１月１８日 火曜日 午後６時１４分
