21
Getting s
tar
te
d
VQT3Z99
Inserting or removing
media
e.g.,
[BTT182]
≥
When inserting a media item, ensure that it is
facing the right way up.
≥
When removing the SD card, press the centre
of the card and pull it straight out.
≥
If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥
[BTT282]
Use the front USB port when you
connect a USB memory or a USB HDD. The
USB port on the rear panel is only for the
Communication Camera.
≥
[BTT182]
Use the front USB port when you connect
a iPod/iPhone, USB memory or a USB HDD.
The USB port on the rear panel is only for the
following devices :
– Wireless LAN Adaptor
– Communication Camera
Enjoying TV with unit’s
speakers
1
Connect the TV and the main unit.
(
>
15
s
16)
2
Press [EXT-IN] several times to select the
appropriate external input mode. (
>
22)
≥
Reduce the volume on the TV to its
minimum, and then adjust the volume of the
main unit.
Press [AUDIO] several times to select the
audio. (M1, M2)
≥
Set “PCM-Fix” (
>
37) to “Off”.
≥
Only works with Dolby Dual Mono.
≥
You cannot change the audio type when the TV is
connected to this unit via the AUX terminal.
SD CARD
iPod
VOL
OPEN/CLOSE
*
* (For details
>
27)
Selecting the type of audio
SC-BTT282&182EB-VQTVQT3Z99_mst.book 21 ページ 2012年2月8日 水曜日 午前11時8分