21
P
layb
ack
VQT5F60
By using the Bluetooth
®
connection, you can
listen to the sound from the Bluetooth
®
device
wirelessly.
Refer to the owner’s manual of the Bluetooth
®
device for details.
≥
If you intend to use an NFC (Near Field
Communication)-compatible Bluetooth
®
device,
proceed to “One-Touch Connection
(Connecting by NFC)”.
1
Turn on the Bluetooth
®
feature of the
device.
2
Press [ ].
≥
If “Panasonic BTT” is displayed on the
Bluetooth
®
menu of the device, go to step 4.
3
Press and hold [
j
PAIRING].
≥
“PAIrInG” will be displayed on the unit’s
display and the unit will enter pairing
standby mode.
≥
If another Bluetooth
®
device is already
connected, the connection will be
terminated automatically.
4
Select “Panasonic BTT” from the
Bluetooth
®
menu of the device.
≥
If another Bluetooth
®
device is already
connected, disconnect it.
≥
“ConnECtEd” will be displayed on the unit’s
display and the connection will be
established.
5
Start play on the Bluetooth
®
device.
≥
If prompted for the passkey, input “0000”.
≥
You can register up to 8 devices with this system. If a 9th
device is paired, one of the other registered devices will be
replaced.
≥
This system can only be connected to one device at a time.
≥
When “Bluetooth” is selected as the source, this system
will automatically try and connect to the last connected
Bluetooth
®
device. If the connection attempt fails, try to
establish a connection again.
≥
If you switch the source, the Bluetooth
®
device will be
disconnected.
≥
If the image and sound are out of sync during playback,
restart the playback application you are using. If the
problem persists, connect the Bluetooth
®
device and this
unit with an audio cable.
≥
“Bluetooth Standby Mode” (
>
31)
For NFC-compatible Android
TM
devices only
(Android
TM
version 4.1 or higher)
Simply by touching an NFC-compatible
Bluetooth
®
device on the unit, you can complete
all preparations, from registering a Bluetooth
®
device to establishing a connection.
1
Turn on the NFC feature of the device.
2
Touch and hold your device on the NFC
touch area of this unit. (
>
10)
≥
If the unit is in standby, it will turn on, and
“nFC” will be displayed on the unit’s display.
Keep the device in contact with the unit.
≥
When the Bluetooth
®
device is paired and
connected, “ConnECtEd” is displayed on
the unit’s display. Once the registration and
connection of the Bluetooth
®
device is
complete, move the device away from the
unit.
≥
If “ConnECtEd” is not displayed, change the
touching position.
3
Start play on the Bluetooth
®
device.
≥
When the connection is established, the playback may
start automatically depending on the type of device being
used.
≥
The One-Touch Connection may not work properly
depending on the type of device being used.
Bluetooth
®
operations
PAIRING
CONNECTED
One-Touch Connection
(Connecting by NFC)
SC-BTT466&465&405P-VQT5F60_mst.book 21 ページ ２０１４年３月２４日 月曜日 午前１１時３１分
