background image

EU

RQTX1057-3B

H0310HU3080

En

Panasonic Corporation

Web Site: 

http://panasonic.net

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

© Panasonic Corporation 2010

Placement

Set the unit up on an even surface away from direct 

sunlight, high temperatures, high humidity, and excessive 
vibration. These conditions can damage the cabinet and other 
components, thereby shortening the unit’s service life.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload 

the unit and cause a fire.

Do not use a DC power source. Check the source carefully 

when setting the unit up on a ship or other place where DC 
is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not 

damaged. Poor connection and lead damage can cause fire 
or electric shock. Do not pull, bend, or place heavy items on 
the lead.

Grasp the plug firmly when unplugging the lead. Pulling the 

AC mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause 

electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause 

electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric 

shock or malfunction. If this occurs, immediately disconnect 
the unit from the AC mains supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain 

flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is 

interrupted, indicators fail to light, smoke appears, or any 
other problem that is not covered in these instructions occurs, 
disconnect the AC mains lead and contact your dealer or 
an authorized service centre. Electric shock or damage to 
the unit can occur if the unit is repaired, disassembled or 
reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the AC 

mains if it is not to be used for a long time.

Safety precautions

Information for Users on Collection and Disposal 
of Old Equipment and used Batteries

These symbols on the products, packaging, 
and/or accompanying documents mean that 
used electrical and electronic products and 
batteries should not be mixed with general 
household waste.
For proper treatment, recovery and recycling 
of old products and used batteries, please 
take them to applicable collection points, in 
accordance with your national legislation and 
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries 
correctly, you will help to save valuable 
resources and prevent any potential 
negative effects on human health and the 
environment which could otherwise arise 
from inappropriate waste handling.
For more information about collection and 
recycling of old products and batteries, 
please contact your local municipality, your 
waste disposal service or the point of sale 
where you purchased the items.
Penalties may be applicable for incorrect 
disposal of this waste, in accordance with 
national legislation.

For business users in the European 
Union

If you wish to discard electrical and 
electronic equipment, please contact your 
dealer or supplier for further information.

[Information on Disposal in other 
Countries outside the European Union]

These symbols are only valid in the 
European Union. If you wish to discard these 
items, please contact your local authorities 
or dealer and ask for the correct method of 
disposal.

Note for the battery symbol (bottom two 
symbol examples):

This symbol might be used in combination 
with a chemical symbol. In this case it 
complies with the requirement set by the 
Directive for the chemical involved.

RQTX1057-3B (DBEB) 16.08.10.indd   16

8/16/2010   12:04:38 PM

Summary of Contents for SC-HC20DBEB

















Reviews: