background image

18

RQT9882

Attaching the unit to a wall (optional)

This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the wall and the 
screws used for securing to the wall are capable of supporting at least 33 k

g

 (72.8 lbs). The screws and 

other items are not supplied as the type and size will vary with each installation.

Refer to step 5 of “Wall mount instructions” for details about the required screws.

As an additional protective measure, attach the unit to the wall with the fall prevention cord.

Supplied accessories

1 Safety holder

1 Screw

2 Wall mount brackets

Additionally required accessories 
(commercially available)

4 Wall mount bracket fixing screws

1 Safety holder fixing screw

1 Fall prevention cord*

1 Screw eye

* Use a cord that is capable of supporting over 33 k

g

 

(72.8 lbs) (with a diameter of about 1.5 mm (

1

/

16

q

)).

1

Detach the stand from the unit.

Unscrew the fixing screw at the bottom of the unit.

Gently pull the stand off the unit as illustrated.

Keep the removed screw and the stand in a safe 
place.

2

Fix the safety holder onto the unit with the 

screw (supplied).

Screw tightening torque: 50 N

0

cm (0.4 lbf

0

ft) to 

70 N

0

cm (0.5 lbf

0

ft).

3

Attach the fall prevention cord (not supplied) to 

this unit.

Installation accessories

Keep the safety holder out of reach of children to 
prevent swallowing.

Keep the screws out of reach of children to 
prevent swallowing.

Keep the wall mount brackets out of reach of 
children to prevent swallowing.

Safety precautions

Professional installation is required.
The installation should never be done by any 
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY 
DAMAGE AND/OR SERIOUS INJURY, 
INCLUDING DEATH RESULTING FROM 
IMPROPER INSTALLATION OR INCORRECT 
HANDLING.

WARNING:

To prevent injury, this apparatus must be 
securely attached to the wall in accordance with 
the installation instructions.

Wall mount instructions

Before installation, turn the unit off and disconnect 
the AC power supply cord from the AC outlet.

Stand

Fixing screw

Soft blanket or cloth

Screw
(supplied)

Cord 
(not supplied)

SC-HC39_PPC~RQT9882_mst.book  18 ページ  2014年1月31日 金曜日 午後7時45分

Summary of Contents for SC-HC39

























Reviews: