7
RQT9708
EN
GL
IS
H
3
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥
Use a spirit level to ensure both wall mount brackets are
level.
≥
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 k
g
(72.8 lbs).
4
Fix the safety holder onto the unit with the
screw (supplied).
{.
Screw tightening torque: 50 N
0
cm (0.4 lbf
0
ft) to 70
N
0
cm (0.5 lbf
0
ft).
5
Attach the fall prevention cord (not supplied) to
this unit.
≥
Use a cord that is capable of supporting over 33 k
g
(72.8 lbs) (with a diameter of about 1.5 mm (
1
/
16
q
)).
6
Hook the unit securely onto the wall mount
brackets with both hands.
≥
Connect the FM antenna and the AC power supply cord
to the unit before hanging the unit onto the wall. (
>
8)
≥
After hanging the unit, release your hand carefully to
confirm the unit sits securely on the wall.
7
Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 k
g
(72.8 lbs).
≥
Refer to step 3 for requirements before screwing.
8
Attach the fall prevention cord (not supplied) to
the wall.
≥
Make sure that the screw used and the wall are strong
enough to support the weight of at least 33 k
g
(72.8 lbs).
≥
Make sure that the slack of the cord is minimal.
At least 30 mm (1
3
/
16
q
)
‰
7.5 mm (
19
/
64
q
) to
‰
9.4 mm (
3
/
8
q
)
4 mm
(
5
/
32
q
)
Wall mount bracket
Screw
(supplied)
Cord (not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the wall
Cord (not supplied)
Screw eye (not supplied)
Wall
SC-HC57~RQT9708.book 7 ページ 2012年3月2日 金曜日 午後2時4分