2.1 System Configuration of This Product
WUME-SCHG1ETC-2
2-3
Information
●
If
HG-SC
series and
HG-TC
series controllers are used in combination, connect the slave con-
trollers of the same series as the master controller on the near side of the master controller and
connect the slave controllers of different series from the master controller on the far side of the
master controller.
Example: When the master controller is
HG-SC
□
Controller - Slave unit
HG-SC□
Controller - Slave unit
HG-TC□
Controller - Master unit
HG-SC□
SC-HG1-ETC
●
If
HG-TC
series and
HG-SC
series controllers are used in combination, there are limitations on
the functions below.
Item
Description of limitation
1
Calculation
function
Calculation is only performed when the slave unit is the same series as the
master unit.
Calculation is not performed when the slave unit series is different from the
master unit series. "CALC" does not appear in the display of a slave unit of a
different series.
2
Input all
The master unit only performs input all when the slave units are the same
series.
A slave unit of a different series from the master unit does not perform input
even when the external input settings match those of the master unit.
3
Copy function
Copying is only performed when the slave unit is the same series as the mas-
ter unit.
When copying is executed, "NOW COPY" appears even on the display of a
slave unit of a different series from the master unit , but copying is not per
-
formed.
4
Interference
prevention
This function is only available on the
HG-TC
series controller. The function is
not executed on the
HG-SC
series controller.
Summary of Contents for SC-HG1-ETC
