Getting started
RQT9690
11
Connect the speaker cables.
≥
Use the “Panasonic” logo to identify the left and right speakers, then connect the cables (as illustrated).
≥
Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw into the wall.
≥
Use the measurements indicated below to identify the screwing positions on the wall.
≥
Leave at least 20 mm (
25
/
32
q
) of space above and on each side of the speaker to allow enough space for fitting the
speaker.
≥
The position on the wall where the screw is to be attached, as well as the screw, should be capable of supporting over
33 k
g
(72.8 lbs).
≥
Keep the screws out of reach of children to prevent swallowing.
1
Insert the wire
fully.
r
: White
s
: Blue line
2
Press into the
groove.
A
RED
: Right speaker channel (R)
B
WHITE
: Left speaker channel (L)
C
At least 30 mm (1
3
/
16
q
)
D
‰
4.0 mm (
5
/
32
q
)
E
‰
7.0 mm to
‰
9.4 mm (
9
/
32
q
to
3
/
8
q
)
F
Wall or pillar
G
5.5 mm to 6.5 mm (
7
/
32
q
to
1
/
4
q
)
H
326 mm (12
27
/
32
q
)
I
316 mm (12
7
/
16
q
)
J
316 mm (12
7
/
16
q
)
K
26 mm (1
1
/
16
q
)
L
Wall mounting hole
White
Red
Push
Front view (semi-transparent image)
SC-HTB450_RQT9690_mst.book Page 11 Wednesday, February 1, 2012 5:58 PM
