Getting started
Precautions
RQT9922
15
Additionally required accessories (commercially available)
≥
Fall prevention cord ......................................................................................................................
k
2
≥
Screw eyes (to attach the fall prevention cord) .............................................................................
k
2
≥
Use commercially available screws that are capable of supporting over 26 k
g
(57.3 lbs).
≥
Use a cord that is capable of supporting over 26 k
g
(57.3 lbs) (with a diameter of about 1.5 mm (
1
/
16
q
)).
Attach the cord to the main unit.
A
Cord
§
§
If the cord cannot be threaded through the holes, try bending the cord in 2 locations,
about 5 mm (
3
/
16
q
) apart from the tip, at an angle of 45
o
(as
illustrated above).
Place the main unit in the desired position and attach each cord onto the
rack or table.
≥
Make sure that the slack of the cord is minimal.
≥
Do not lean the main unit against the TV or wall.
B
Screw eye
≥
Attach at a position capable of supporting over 26 k
g
(57.3 lbs).
≥
Depending on the placement of the main unit, the screwing position of the screw eye may differ.
When placing the main unit on a rack or on a table
SC-HTB580P_RQT9922-Y.book 15 ページ ２０１３年１２月１９日 木曜日 午前１１時０分
