12
VQT4U48
Attaching the unit to a wall (optional)
This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the
wall are strong enough to support the weight of at least 33 k
g
.
The screws and other items are not supplied as the type and size will vary with each installation.
≥
Refer to step 2 of “Wall mount instructions” for details about the required screws.
≥
Be sure to attach the fall prevention cord as a secondary safety measure.
∫
Supplied accessories
≥
1 Safety holder
≥
1 Screw
≥
2 Wall mount brackets
∫
Additionally required accessories
(commercially available)
≥
4 Wall mount bracket fixing screws
≥
1 Safety holder fixing screw
≥
1 Fall prevention cord*
≥
1 Screw eye
* Use a cord that is capable of supporting over 33 k
g
(with a diameter of about 1.5 mm).
1
Measure and mark the position of the wall mount
brackets (Both sides).
{.
Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
Installation accessories
≥
Keep the safety holder out of reach of children to
prevent swallowing.
≥
Keep the screws out of reach of children to prevent
swallowing.
≥
Keep the wall mount brackets out of reach of children
to prevent swallowing.
Safety precautions
Professional installation is required.
The installation should never be done by any
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY
DAMAGE AND/OR SERIOUS INJURY,
INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT
HANDLING.
≥
Be sure to install this unit as indicated within
these operating instructions.
Wall mount instructions
Before installation, turn the unit off and disconnect the
AC mains lead from the mains socket.
252 mm
12.5 mm
300 mm
319 mm
770 mm
83 mm
252 mm
82 mm
169 mm
570 mm
67 mm
122 mm
SC-NE1_EG~VQT4U48.book 12 ページ ２０１３年１月１５日 火曜日 午後１時４分
