13
VQT4U48
ENGLISH
2
Attach the wall mount bracket to the wall with 2
screws (not supplied). (Both sides)
≥
Use a level to ensure both wall mount brackets are
level.
3
Fix the safety holder onto the unit with the screw
(supplied).
{.
Screw tightening torque: 50 N
0
cm to 70 N
0
cm.
4
Attach the fall prevention cord (not supplied) to this
unit.
5
Hook the unit securely onto the wall mount
brackets with both hands.
≥
Connect the AC mains lead to the unit before hanging
the unit onto the wall. (
l
5)
≥
After hanging the unit, release your hands carefully to
confirm the unit sits securely on the wall.
6
Drive the safety holder fixing screw (not supplied)
to secure the safety holder onto the wall.
≥
Refer to step 2 for requirements before screwing.
7
Attach the fall prevention cord (not supplied) to the
wall.
≥
Make sure that the slack of the cord is minimal.
At least 30 mm
‰
7.5 mm to
‰
9.4 mm
‰
4 mm
Wall mount bracket
Screw
(supplied)
Cord
(not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the wall
Cord (not supplied)
Screw eye
(not supplied)
Wall
SC-NE1_EG~VQT4U48.book 13 ページ ２０１３年１月１５日 火曜日 午後１時４分
