background image

3

VQT4U56

Safety precautions

Unit

To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or 

splashing.

– Do not place objects filled with liquids, such as vases, on 

this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to 

qualified service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the 

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the plug.

– Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device. Install this unit 
so that the mains plug can be unplugged from the socket 
outlet immediately.

Button-type battery (Lithium battery)

Risk of fire, explosion and burns. Do not recharge, 
disassemble, heat above 

60 

o

or incinerate.

Keep the Button-Type battery out of the reach of children. 
Never put Button-Type battery in mouth. If swallowed call 
your doctor.

Unit

This unit utilizes a laser. Use of controls or adjustments or 
performance of procedures other than those specified herein 
may result in hazardous radiation exposure.

Do not place sources of naked flames, such as lighted 
candles, on this unit.

This unit may receive radio interference caused by mobile 
telephones during use. If such interference occurs, please 
increase separation between this unit and the mobile 
telephone.

This unit is intended for use in moderate climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in 

cabinet or in another confined space. Ensure this unit is 

well ventilated.

– Do not obstruct this unit’s ventilation openings with 

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high 

temperatures, high humidity, and excessive vibration.

Button-type battery (Lithium battery)

Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.

Insert with poles aligned.

Mishandling of batteries can cause electrolyte leakage and 
may cause a fire.
– Remove the battery if you do not intend to use the remote 

control for a long period of time. Store in a cool, dark place.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct sunlight 

for a long period of time with doors and windows closed.

When disposing the batteries, please contact your local authorities 
or dealer and ask for the correct method of disposal.

Caution for AC Mains Lead

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin 
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure 
that the replacement fuse has a rating of 5-ampere and 
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark 

Ï

 or the BSI mark 

Ì

 on the 

body of the fuse.

If the plug contains a removable fuse cover you must 
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used 
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your 
local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of 
AC mains plug (figures A and B). Confirm the AC 
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.

1.  Open the fuse cover with a screwdriver.

2.  Replace the fuse and close or attach the fuse cover.

WARNING

CAUTION

Product Identification Marking is located on the bottoms of 
the CD unit and the speaker unit.

(Bottom of product)

Figure A

Figure B

Fuse cover

Figure A

Fuse

(5 ampere)

Figure B

Fuse

(5 ampere)

SC-NE5DB~VQT4U56.book  3 ページ  2013年1月21日 月曜日 午後6時18分

Summary of Contents for SC-NE5DB

































Reviews: