RQTV0186
12
12
To
Action
pause play
Press [USB
6
].
Press again to resume play.
stop play
Press [
7
].
“RESUME” is displayed. The position is
memorized.
Press [USB
6
] to resume.
Press [
7
] again to clear the position.
skip track
Press [ /
4
] or [ /
¢
].
skip album
Press [ALBUM
or
] in the play mode.
Press [ALBUM
or
] once and then
the numeric buttons in the stop mode.
Display function
Display function
Press [DISPLAY] repeatedly during play or pause mode.
Elapsed
time Remaining time Album name Track name
ID3 (Artist) ID3 (Track)
ID3 (Album)
For other operating functions, they are similar as those
described in “Discs” (
➡
page 7 and 8).
Compatible devices
Compatible devices
Devices which are defi ned as USB mass storage class:
• USB devices that support bulk only transfer.
• USB devices that support USB 2.0 full speed.
Supported Format
Supported Format
Files must have the extension “.mp3” or “.MP3”.
Note
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not supported [Only FAT 16/32
(File Allocation Table 16/32) fi le system is supported].
• Depending on the sector size, some fi les may not work.
• This unit can access up to 255 albums (including blank folders) and
2500 tracks.
• The maximum number of tracks in a folder are 999 tracks.
• Only one memory card will be selected when connecting a multiport
USB card reader. Typically the fi rst memory card inserted.
• Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
• When you connect your digital audio player to the USB jack, it
charges all the time except in standby mode or during option port
charging mode.
Numeric
buttons
Connecting and playing a USB mass
Connecting and playing a USB mass
storage class device
storage class device
MP3
The USB connectivity enables you to connect and play MP3
tracks from USB mass storage class. Typically, USB memory
devices. (Bulk only transfer)
Preparation
Before connecting any USB mass storage device to the unit,
ensure that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The
USB device is not recognised by this unit.
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised
by this unit.
1
Reduce the volume and connect the USB mass
storage device.
2
Press [USB
6
] to start play.
External unit
NS55_E_EN.indd 12
NS55_E_EN.indd 12
2/5/07 11:58:45 AM
2/5/07 11:58:45 AM
