background image

15

RQT9

99

5

You can view information about the DAB broadcast, 

programme type, ensemble label, frequency and time.

Press [DISPLAY] to view available information.

1

Press [RADIO MENU] repeatedly to select an 
option.

2

Press [

2

,

1

] to select the desired setting and 

then press [OK].

When adjusting the antenna, you can check the 

reception quality.

1

Press [RADIO MENU] repeatedly to select “Signal 
Quality”.

2

Press

 

[

2

,

1

]

 

to select frequency.

The current frequency block is displayed and then 

the reception quality is indicated.

Using the auxiliary input

You can connect a VCR, DVD player etc. and listen to 

the audio through this system.

Preparation

Connect the external equipment.

1

Press [RADIO, EXT-IN] repeatedly to select 
“AUX”.

2

Play the external equipment.

Using the PC input

You can play back music on the PC with this system’s 

speakers by connecting a PC to the PC IN terminal on 

the main unit.

About supported format, refer to “Specifications” (

@

21).

(as of March 2015)

1

Disconnect the AC mains lead.

2

Connect the main unit and a PC.

3

Connect the AC mains lead to the main unit and 
turn this system on.

4

Press [RADIO, EXT-IN] repeatedly to select “PC”.

5

Operate the PC for playback.

Note:

• When you play back high-resolution audio, it is 

recommended that you use a compatible USB 2.0 High 

Speed Cable.

Viewing available information

DAB settings

DAB Secondary
Primary

To listen to primary service.

Secondary

To listen to secondary services.

” is shown.

Auto Clock Adj
On Adjust

Start auto clock adjustment.

Off Adjust

Cancel auto clock adjustment.

DAB signal quality

Reception quality

0 (poor) to 8 (excellent) 

Before connecting to a PC

Follow the steps below.

• Refer to the following for the recommended OS 

versions for your PC:

– Windows Vista, Windows 7, Windows 8, 

Windows 8.1

– OS X 10.7, 10.8, 10.9, 10.10

1

Download and install the dedicated driver to the 
PC. (Only for Windows OS)
Download and install the driver from the website 
below.

http://panasonic.jp/support/global/cs/audio/

(This site is in English only.)

2

Download and install the dedicated app 
“Panasonic Audio Player”

 

(free of charge) on 

your PC. (For Windows OS and OS X)
Download and install the app from the website 
below.

http://panasonic.jp/support/global/cs/audio/

(This site is in English only.)

Listening to audio from a PC

USB

USB 2.0 cable

(not supplied)

Main unit (rear)

Type A

Type B

PC

SC-PMX100-100B_EGEBGN-RQT9995-B.book  15 ページ  2015年7月16日 木曜日 午後3時54分

Summary of Contents for SC-PMX100B

























Reviews: