19
Usi
n
g on
-scre
e
n
me
n
u
s
RQ
TX00
94
∫
Menu 2 (Video)
∫
Menu 3 (Audio)
∫
Menu 4 (HDMI)
Confirming HDMI information
1
Connection status
2
Shows the output signal type.
3
Shows the number of audio channels.
4
(
➜
above, VIDEO FORMAT)
5
(
➜
above, COLOR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (
➜
22, “HDMI” menu),
“– – –” will be displayed in “AUDIO STREAM”.
DATE DISPLAY
[JPEG]
To select “ON” or “OFF” for picture’s
date display
ROTATION
To rotate a picture
(during pause)
[JPEG]
: 0
,------.
90
,------.
180
,------.
270
^--------------------------------------------J
PICTURE MODE
NORMAL
CINEMA1:
Mellows images and enhances
detail in dark scenes.
CINEMA2:
Sharpens images and enhances
detail in dark scenes.
DYNAMIC:
Enhances the contrast for powerful
images.
ANIMATION
: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO,
k
2,
k
4
TRANSFER
MODE
If you have chosen “480p”/“720p”/“1080p”
(progressive), “1080i” (interlaced)
[“VIDEO FORMAT” in Menu 4 (HDMI)] or
“PROGRESSIVE” under “VIDEO OUT (I/P)”
(
➜
21, “VIDEO” menu), select the method of
conversion for progressive output to suit the type
of material.
≥
The setting will return to “AUTO1” when the disc
tray is opened, the unit is turned off or another
source is selected.
AUTO1
: Automatically detects the film and video
content, and appropriately converts it.
AUTO2
: In addition to “AUTO1”, automatically
detects film contents with different frame
rates and appropriately converts it.
VIDEO
: Select when using “AUTO1” or “AUTO2”,
and the content is distorted.
DIALOGUE
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V]
(Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
OFF, ON
Dolby PL
II
OFF, MOVIE, MUSIC
(
➜
26, Using Dolby Pro Logic
II
)
J P G
DAT E
PLII
HDMI STATUS
To show HDMI information.
(
➜
below, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
➜
22, “HDMI”
menu) is set to “ON”.
To sharpen the “720p”, “1080i” and “1080p”
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
➜
22, “HDMI”
menu) is set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
§
480p/720p/1080p
(progressive)
§
480i/1080i
(interlaced)
≥
If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to “480p”.)
§
The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
COLOR SPACE
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (
➜
22, “HDMI”
menu) is set to “ON”.
To select suitable picture color with your TV
YC
b
C
r
(4:2:2)
§
– Luminance and color details is sent
separately. Most of the picture details are in
luminance. The color rate is much higher than
composite video. Compatible for all TV
models.
YC
b
C
r
(4:4:4)
§
– All color details is sent. Luminance and color
details are in same signal.
RGB
– Component video type of signal.
≥
If the setting above is not compatible with your
TV, it will not be displayed.
§
Terms are descriptions of the sample formats
used in digital video. YC
b
C
r
is a video signal for
luminance (Y), blue (C
b
) and red (C
r
) details.
HDMI
HDMI --- INFORMATION
CONNECTED
S
TATE
AUDIO
S
TREAM
MAX CHANNEL
VIDEO FORMAT
COLOR
S
PACE
CONNECTED
PCM
2ch
720p
YC
b
Cr 4:4:4
1
2
3
4
5
e.g.
SC-PT660-663P-PC_eng.book 19 ページ ２００７年１２月１１日 火曜日 午後６時２７分
