4
Si
mp
le
S
etu
p
Asse
mb
ling the
s
p
ea
ker
s
RQ
TX00
94
Preparation
≥
To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥
For assembly, use a Phillips-head screwdriver.
≥
For optional wall mount, refer to page 6.
[PT754]
: Front speakers
∫
Preventing the speakers from falling
≥
You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥
Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
e.g.
[PT754]
Front
speakers
step
1
Assembling the speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Set of pipes (with cable):
For front speakers
2 Bases
8 Screws
4 Small screws
2 Front speakers
Match these holes when
you insert the pipe.
1
Join the pipes.
Screws
Phillips-head
screwdriver
(not included)
Pipe
Small
screws
2
Tighten securely.
Pipe
Speaker
4
Insert the wire
fully.
i
: White
j
: Blue
Tighten
securely.
Cable
Push!
Tighten securely.
5
Press into
the groove.
Base
Pipe
Thread the
cable through
the base.
1
Attach the
pipes to the
speaker.
Pull and press the
cable into the groove.
Screws
Slide into the groove.
2
3
4
1
2
3
Cable
String
(not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
Wall
Approx.
150 mm
(5
29
/
32
z
)
Screw eye
(not included)
SC-PT660-663P-PC_eng.book 4 ページ ２００７年１２月１１日 火曜日 午後６時２７分
