11
RQT0A76
Listening to FM radio
You can preset up to 30 channels.
Channel 1 to 5 will be set as the favourite stations
under (FAVOURITE)
[1] to [5]. (
l
right, “Changing the
stations stored under (FAVOURITE) [1] to [5]”)
Preparation
≥
Make sure that the antenna is connected. (
l
5)
≥
Turn the unit on.
≥
Press [RADIO, USB] repeatedly to select “FM”.
1
Press [PLAY MENU] to select “A.PRESET”.
2
Press [
2
,
1
] to select “LOWEST” or “CURRENT”
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
(“FM 87.50”).
CURRENT:
To begin auto preset with the current frequency.*
1
≥
The tuner starts to preset all the stations it can receive
into the channels in ascending order.
*1: To change the frequency, refer to “Manual tuning”.
Press the numeric buttons, [
:
] or [
9
] to select
the preset station.
≥
Alternatively, press [
:
/
6
] or [
5
/
9
] on this unit
when “PRESET” is selected as the tune mode*
2
.
≥
You can select channel 1 to 5 by pressing one of
(FAVOURITE) [1] to [5] on this unit.
∫
Manual tuning
Press [
6
] or [
5
] to tune in to the station.
≥
Alternatively, press [
:
/
6
] or [
5
/
9
] on this unit
when “MANUAL” is selected as the tune mode*
2
.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
*2: To change the tune mode
1 Press [PLAY MENU] repeatedly to select “TUNE
MODE”.
2 Press [
2
,
1
] to select “MANUAL” or “PRESET”, and
then press [OK].
1
While listening to the radio broadcast
Press [PGM,
s
DEL].
2
Press the numeric buttons to select a preset
number.
≥
Do steps 1 through 2 again to preset more stations.
≥
A station previously stored is overwritten when another
station is stored in the same channel preset.
You can change the stations stored under
(FAVOURITE) [1] to [5] easily.
While listening to the radio broadcast
Press and hold one of [1] to [5] until “P
” appears on
the display.
(“
” stands for a number.)
≥
When you change the stations stored under (FAVOURITE)
[1] to [5], channel 1 to 5 are also changed to the same
corresponding stations.
∫
To display the current FM signal status
For Continental Europe:
Press [DISPLAY] repeatedly to select “FM STATUS”.
For others:
Press [DISPLAY].
≥
“STEREO” is displayed when this unit tunes to a stereo
broadcast.
∫
To display RDS text data
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
≥
RDS is available only when stereo works in reception.
≥
RDS may not be available if reception is poor.
Presetting stations automatically
Listening to a preset channel
Presetting stations manually
Changing the stations stored under
(FAVOURITE) [1] to [5]
“FM ST”:
The FM signal is tuned and in stereo.
“FM - - - -”:
There is no tuned signal or the FM signal
is in monaural.
“FM MONO”: “MONO” is selected as the “FM MODE”.
(
l
19, “If noise is excessive during FM
reception.”)
“PS”:
Programme service
“PTY”:
Programme type
“FREQ”: Frequency
SC-RS52_EGEBGN_RQT0A76-B.book 11 ページ 2016年2月19日 金曜日 午前8時59分