16
RQT0A76
Clock and Timer
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select “CLOCK”.
2
Press [
3
,
4
] to set the time and then press [OK].
∫
To check the time
Press [CLOCK/TIMER].
≥
The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥
Reset the clock regularly to maintain accuracy.
The sleep timer can turn the unit off after a set time.
Press [SLEEP] repeatedly to select the setting
(in minutes).
“SLEEP 30”
-.
“SLEEP 60”
-.
“SLEEP 90”
-.
“SLEEP 120”
^-------------------
“OFF” (Cancel)
("""""""}
≥
The remaining time is indicated on the unit’s display at every
minute except when other operations are performed.
≥
The play timer and sleep timer can be used together. The
sleep timer is always the main timer on the unit.
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
1
Press [CLOCK/TIMER] repeatedly to select
“TIMER ADJ”.
2
Press [
3
,
4
] to set the starting time (“ON TIME”)
and then press [OK].
3
Press [
3
,
4
] to set the finishing time
(“OFF TIME”) and then press [OK].
4
Press [
3
,
4
] to select the music source*
and then
press [OK].
Turning the timer on
1
Prepare the selected music source and set the
desired volume.
2
Press [
F
,
PLAY].
≥
“
F
” is shown.
To cancel, press [
F
,
PLAY] again.
3
Press [
Í
] to turn the unit to standby mode.
∫
To check the settings
Press [CLOCK/TIMER] repeatedly to select
“TIMER ADJ”.
(During standby, press [CLOCK/TIMER] twice.)
≥
The timer starts at a low volume and increases gradually to
the preset level.
≥
The timer comes on at the set time every day if the timer is
on.
≥
If you turn off the unit and turn it on again while a timer is in
operation, the timer will not stop at the end time.
* “CD”, “USB”, “MEMORY”, “DAB+” and “FM” can be set as
the music source.
Setting the clock
Sleep timer
Play timer
SC-RS52_EGEBGN_RQT0A76-B.book 16 ページ ２０１６年２月１９日 金曜日 午前８時５９分
