23
23
RQTV0129
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
The radi
o
/
Cassette tape
s
Playback
You can use either DECK 1 or DECK 2 for tape playback.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics
of these tapes.
1
or
(Main unit)
2
Front side
Insert with the side to be played facing towards you
and the exposed tape facing down.
3
Open the desired deck.
Insert the cassette.
Close the deck by hand.
Start playback.
Every time you press the button:
F
↔
R
F : Forward side is played.
R: Reverse side is played.
Stop
Fast forward or rewind
Select between loaded decks
(main unit:
)
Reverse mode
(while Tape is selected as the source)
Press
and
hold.
Every time you press and hold the button:
: One side is played.
: Both sides are played.
(forward
→
reverse)
Play stops at the end of the reverse
side.
: Both sides are played repeatedly until
[ ] (main unit: [ , STOP]) is pressed.
To listen to 2 tapes consecutively, load a tape
into each deck and select “
”. Both tapes
will be played repeatedly until [ ] (main unit:
[ , STOP]) is pressed.
Note:
• Tape playback is momentarily interrupted if you open the other deck.
• Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
• Tape slack can get caught up in the mechanism and should be taken up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used incorrectly. Use tapes appropriate to this unit’s auto-reverse
mechanism.
Cassette tapes
RQTV0129-2G_1En.indd 23
2/9/06 4:26:16 PM
