24
24
RQTV0129
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly.
Preparation
• Wind up the leader tape so recording can begin immediately.
1
2
(Main unit)
3
(Press and hold)
Getting started.
Open DECK 2 and insert a cassette
( page 23)
.
The tape direction is automatically set to
“F ”.
Select the reverse mode.
Every time you press and hold the button:
: One side only records.
,
: Both sides record
(forward
→
reverse).
“
” is automatically changed to “ ” when
[ , REC] on the main unit is pressed.
4
Select the source to be recorded.
Radio recording:
Tune to the required
station ( page 22).
Disc recording:
➀
Insert the disc(s) you want to record.
➁
Prepare the desired disc recording
mode.
• To record programmed items
[perform steps 1 and 2, “Program
play (up to 32 items)” ( page 13)].
Ensure disc is stopped.
Tape-to-tape recording:
➀
➁
Open DECK 1 on the main unit and
insert the cassette you want to record.
5
(Main unit)
Start
recording
Note:
• Multi-channel sources (3 to 5.1 channels) are automatically downmixed to 2 channels during
recording.
• Changes to volume and sound or field quality do not affect recording.
• You cannot open DECK 1 while recording.
• You cannot fast-forward or rewind one deck while recording with the other.
Stop recording
If the tape finishes before the disc
The disc continues playing. Press [ ] (main
unit: [ , STOP]) to stop it.
Erasure prevention
Use a screwdriver or similar object to break out the tab.
Side A
Tab for side B
Tab for side A
Erase a tape
1
2
Insert the recorded tape into DECK 2.
Ensure there is no tape in DECK 1.
3
(Press and hold)
4
(Main unit)
To re-record on a protected cassette
Cover the hole with adhesive tape.
Adhesive tape
Cassette tapes (continued)
RQTV0129-2G_1En.indd 24
2/9/06 4:26:25 PM
