27
27
RQTV0129
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
Sound field
and
sound
qualit
y /
Using the timer
s
Using the timers
Setting the time
This is a 24-hour clock.
1
2
(within 7 seconds
or so)
3
Select “CLOCK”.
Every time you press the button:
➞
CLOCK
PLAY
Previous display
REC
➞
Set the time.
Finish the setting.
Display the time
Press [CLOCK/TIMER] once when the unit is
on or at standby mode.
The time is shown for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
The play/record timer
You can set the timer to come on at a certain time to wake you up (play timer) or to record a radio station or from the music
port source (record timer).
The play and record timers cannot be used together.
Preparation
• Turn the unit on and set the clock.
•
For the play timer
, prepare the desired music source; cassette (DECK 2 has the priority), disc number (1 ~ 5), radio or
music port source, and set the volume.
•
For the record timer
, check the cassette’s erasure prevention tabs ( page 24) and insert the tape in DECK 2
( page 24) and tune to the radio station ( page 22) or select the music port source ( page 29).
1
2
3
Select the timer function.
Every time you press the button:
➞
CLOCK
PLAY
Previous display
REC
➞
PLAY: to set the play timer
REC: to set the record timer
(Proceed to the next step within 7 seconds)
Set the ON time.
Proceed to set the OFF time.
• Repeat steps 2 and 3 to set
the OFF time.
4
5
Display the timer indicator.
Every time you press the button:
PLAY
(off)
REC
➞
PLAY: to turn the play timer on
REC: to turn the record timer on
(The indicator does not appear if the start and finish
times or the clock has not been set.)
Turn the unit off.
The unit must be off for the timers to operate.
•
Play timer
:
Play will start in the set condition at
the set time with volume increasing
gradually to the set level.
•
Record timer
: The unit comes on 30 seconds before
the set time with the volume muted.
RQTV0129-2G_1En.indd 27
2/9/06 4:26:37 PM
