28
28
RQTV0129
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
The play/record timer (continued)
Cancel the timer
Press [ PLAY/REC] to clear the timer indicator
from the display.
(The timer comes on at the set time everyday if
the timer is on.)
Change the source or volume
When the unit is on
1. Press [ PLAY/REC] to clear the timer
indicator from the display.
2. Make changes to the source or volume.
3. Perform steps 3 and 4 ( page 27).
If you use the unit after the timers are set
After using, check that the correct cassette/disc(s) are
loaded before turning the unit off.
Note:
• If you turn the unit off and on again while a timer is functioning,
the finish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer
comes on, the system turns on and engages MUSIC PORT as
the source. If you wish to playback or record from the portable
audio equipment, just activate the equipment’s play mode and
increase the volume. (See the portable audio equipment’s
instruction manual.)
Change the play/record times
When the unit is on
Perform steps 1, 2 and 4 ( page 27).
Check the settings
Press [CLOCK/TIMER] while the unit is on to
select “ PLAY” or “ REC”.
• The settings are shown in the following
order:
– Play timer: start time
→
finish time
→
source
→
volume
– Record timer: start time
→
finish time
→
source
To check the settings while the unit is off
1. Press [CLOCK/TIMER].
2. During clock display, press [CLOCK/TIMER]
again.
The sleep timer
This timer turns the unit off after a set time.
Set the sleep timer
While enjoying the desired source
Press and hold successively to select the
time (minutes).
Every time you press and hold the button:
SLEEP 30
→
SLEEP 60
→
SLEEP 90
→
SLEEP 120
SLEEP OFF
AUTO OFF
Cancel the sleep timer
Press and hold successively to select
“SLEEP OFF”.
Note:
• The sleep timer will be turned off when you start
recording.
• You can use the sleep timer in combination with the
play/record timer.
• Make sure the unit is off before the play/record
timer’s start time.
Confirm the remaining time
Press and hold to show the remaining time.
Change the settings
Press and hold successively to select a new
setting.
Using the timers (continued)
RQTV0129-2G_1En.indd 28
2/9/06 4:26:41 PM
