Using other equipment
RQT8092
26
ENGLISH
Using other equipment
26
Optional antenna connections
Use outdoor antenna if radio reception is poor.
FM outdoor antenna
FM outdoor antenna
(not included)
Back of the
main unit
75 coaxial cable
(not included)
FM ANT
(75
Ω
)
•
Disconnect the FM indoor antenna.
•
The antenna should be installed by a competent technician.
AM outdoor antenna
AM loop
antenna
(included)
AM outdoor antenna
(not included)
Back of the
main unit
5 -12 m
2
1
AM ANT
LOOP
EXT
•
Run a piece of vinyl wire horizontally across a window or other
convenient location.
•
Leave the loop antenna connected.
Note
Disconnect the outdoor antenna when the unit is not in use.
Do not use the outdoor antenna during a lightning storm.
Home Theater—Enjoying more powerful
sound
Enjoy the powerful movie theater and hall-like sound available with
multiple channel audio found on DVD-Video by connecting an
amplifier and speakers.
Before connection
•
Disconnect the AC power supply cord.
•
Turn off all equipment and read the appropriate operating
instructions.
•
The equipment connections described are examples.
•
Peripheral equipment and optional cables sold separately unless
otherwise indicated.
To enjoy multi-channel surround sound
Connect an amplifier with a built-in decoder or a decoder-amplifier
combination.
Change the settings in “PCM Digital Output” in the “Audio” tab (
A
page 19).
•
You can only use DTS Digital Surround decoders that are
compatible with DVD.
Recording Output
•
With DVD, the following conditions must be met:
a
the disc doesn’t
have protection preventing digital recording, and
b
the recording
equipment can handle signals with a sampling frequency of 48 kHz.
•
You cannot record WMA/MP3.
When recording DVDs, make the following settings.
– Advanced Surround: Off (
A
page 23).
– PCM Digital Output: Up to 48 kHz (
A
page 19, “Audio” tab).
– Dolby Digital/DTS Digital Surround/MPEG
\
: PCM (
A
page 19,
“Audio” tab).
\
MPEG: For areas except Southeast Asia.
(DVD) IN
VOLUME
Amplifier
(not included)
Speakers (example)
Connect three or more
speakers for surround
sound.
Optical digital audio cable
(not included)
Do not bend sharply when
connecting.
Back of the
main unit
OPTICAL
OUT
Digital output
RAM
DVD-V
VCD
CD
WMA
MP3
Change the settings when you have connected equipment through
this unit’s OPTICAL OUT terminal.
PCM Digital Output
Select the maximum sampling frequency of PCM digital output.
Check the digital input limitations of the equipment you connect.
Off:
When not connected digitally
Up to 48 kHz
(factory preset):
Signals over 48 kHz converted to 48 or 44.1 kHz
Up to 96 kHz:
Signals over 96 kHz converted to 48 or 44.1 kHz
Note
•
Signals from copy-protected discs are converted to 48 or 44.1 kHz
irrespective of the setting.
•
Some equipment cannot handle sampling frequencies of 88.2
kHz, even if they can handle 96 kHz. Read your equipment’s
operating instructions for details.
Dolby Digital, DTS Digital Surround and MPEG
Bitstream
(Factory preset for Dolby Digital and DTS Digital
Surround):
Select if the equipment you connected can decode the signal.
PCM
(Factory preset for MPEG ):
Select if the equipment you connected cannot decode the signal.
MPEG: For areas except Southeast Asia.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels
of noise which can damage your hearing and the speakers.
Summary of Contents for SC-VK62D
Page 64: ...RQT8092 ﻓﺎرﺳﻰ 33 64 Memo ...
