27
RQTV0239
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
OTHER OPERA
TIONS
Playing and recording using the cassette tapes (continued)
Stop recording
Stop recording
If the tape fi nishes before the disc
The disc continues playing. Press [ ] (main unit:
[ , STOP]) to stop it.
To erase a recorded sound
To erase a recorded sound
1
Press [
,
TAPE] and then [
7
].
2
Insert the recorded cassette into DECK 2.
Ensure there is no cassette in DECK 1.
3
Press and hold [PLAY MODE] to select the
reverse mode.
4
Press [ , RECORD] on the main unit.
Erasure prevention
Erasure prevention
Use a screwdriver or similar object to break out the tab.
Side A
Tab for side B
Tab for side A
To re-record on a protected cassette
To re-record on a protected cassette
Cover the hole with adhesive tape.
Adhesive tape
Note:
• Multi-channel sources (3 to 5.1 channels) are automatically
downmixed to 2 channels during recording.
• Changes to volume and sound or fi eld quality do not affect
recording.
• You cannot open DECK 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.
Recording
Recording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used,
but this unit will not be able to record or erase them
correctly.
Preparation
Wind up the leader tape so recording can begin
immediately.
Press [
,
TAPE] and then [
7
].
1
Press [OPEN,
0
] on the main unit for DECK 2
and insert the cassette to be recorded.
The tape direction is automatically set to “F ”.
Insert with the side to be recorded facing towards
you and the exposed tape facing down.
2
Select the reverse mode of DECK 2.
Every time you press and hold [PLAY MODE]:
: One side only records.
,
: Both sides record (forward
→
reverse).
“
” is automatically changed to “
” when
[ , RECORD] on the main unit is pressed.
3
Select the source to be recorded.
Radio recording:
Select the preset station (
\
page 26).
Disc recording:
➀
Insert the disc(s) you want to record.
Press
[
3
, DVD/CD] and then [
7
, STOP].
➁
Prepare the desired disc recording mode.
To record programmed items, perform steps 1
and 2, “Program play (up to 32 items)” (
\
page 17).
Ensure the disc has stopped.
Tape-to-tape recording:
➀
Press [ , TAPE] and then [
7
].
➁
Press [
0
, OPEN] on the main unit to open
DECK 1 and insert the cassette you want to
record.
4
Press [
¶
, RECORD] on the main unit to start
recording.
RQTV0239_1L.indd 27
RQTV0239_1L.indd 27
6/12/07 12:36:37 PM
6/12/07 12:36:37 PM
