29
RQTV0239
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
OTHER OPERA
TIONS
You cannot use Surround Enhancer, Center Focus, Super
Surround and Subwoofer level if you have connected
headphones (“ERROR” appears on the display).
You may experience a reduction in sound quality when
these sound fi eld systems are used with some sources. If
this occurs, turn the sound fi eld system off.
Using sound effects
Using the Manual Equalizer
Using the Manual Equalizer
(MANUAL EQ)
(MANUAL EQ)
(by remote control only)
(by remote control only)
Create your own sound quality effects.
1
Press [SOUND] to select “MANUAL EQ”.
2
(
Within 12 seconds or so
)
Change the sound quality with the cursor
buttons.
➀
Select the sound range to be adjusted with [ ]
or [ ].
BASS
MID
TREBLE
➁
Adjust the level with [ ] or [ ].
(–3 to +3)
Repeat step 2 to set the desired sound quality.
The original display is restored on the display panel in
about 3 seconds.
To cancel
Press [SOUND] to select “EQ-OFF”.
The changes you make are stored and automatically
recalled the next time you select “MANUAL EQ”.
Using the sound fi eld control
Using the sound fi eld control
Press [SOUND] (main unit: [SOUND EQ]) to select a
setting.
Every time you press [SOUND] on the remote control:
MANUAL EQ
HEAVY
CLEAR
SOFT
EQ-OFF
HALL
LIVE
DISCO
Every time you press [SOUND EQ] on the main unit:
HEAVY
CLEAR
SOFT
DISCO
EQ-OFF
HALL
LIVE
HEAVY
:
Adds punch to rock.
CLEAR
:
Clarifi es higher sounds.
SOFT
:
For background music.
DISCO
:
Reverberates sound to make you feel
like you are in a disco.
LIVE
:
Makes vocals more alive.
HALL
:
Expands sound to make you feel like you
are in a hall.
EQ-OFF
:
Canceled (no effect is added).
MANUAL EQ :
( see below).
To check the current setting
Press [SOUND] (main unit: [SOUND EQ]).
To record your karaoke
To record your karaoke
performance
performance
1
Adjust the volume with [-
] and
[-
MIC VOL+].
2
Press [ , RECORD] and sing along.
To record from VCD with playback control
a. Press [
7
] on the remote control and then press the
numeric buttons (( page 15).
).
b. Press [
¶
, RECORD] to start recording..
Recording your voice
Recording your voice
1
Press [ , RECORD] and speak through the
microphone(s).
2
Adjust the volume with [-
] and
[-
MIC VOL+].
To stop recording
Press [
7
, STOP].
Note:
When playing the recorded tape, be sure to select the “Audio
L R” mode.
Changing the pitch
Changing the pitch
Use this function to change the pitch level.
Press [
I
] or [#] on the remote control to select the
pitch between -6 and +6.
Vocal mute function
Vocal mute function
Use this function on stereo sources to block out the
vocals so you can sing along to the music.
Press [V. MUTE] on the remote control.
Every time you press the button:
V.MUTE ON V.MUTE OFF
Note:
This function is not suitable for the following sources.
• Monaural
recordings
• Classical music or works performed by a limited number of
instruments
• Chorus works or duets
RQTV0239_1L.indd 29
RQTV0239_1L.indd 29
6/12/07 12:36:40 PM
6/12/07 12:36:40 PM
