20
RQ
T
9
59
4
ENGL
ISH
You can attach all of the speakers (except subwoofer) to a wall.
≥
The wall or pillar on which the speakers are to be attached should be
capable of supporting 10 k
g
per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers, and personal injury.
1 Drive a screw (not supplied) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
∫
Tips
Use the measurements indicated below to identify the screwing positions
on the wall.
≥
Leave at least 20 mm of space above the speaker and 10 mm on each
side to allow enough space for fitting the speaker.
Speaker installation option
Attaching to a wall
e.g., Surround speaker
DO NOT
DO
≥
In this position, the speaker will
likely fall if moved to the left or
right.
≥
Move the speaker so that the
screw is in this position.
[XH70]
Front/Surround speaker
[XH75]
Surround speaker
[XH70]
Center speaker
[XH75]
Center speaker
At least 30 mm
‰
7.0 mm to
‰
9.4 mm
Wall or pillar
5.5 mm to 7.5 mm
‰
4.0 mm
A
18 mm
B
99 mm
C
40 mm
D
40 mm
A
24 mm
B
116 mm
C
40 mm
D
40 mm
E
17 mm
F
64 mm
G
24 mm
H
96 mm
I
27 mm
E
18 mm
F
65 mm
G
24 mm
H
95.5 mm
I
27 mm
[XH75]
Front speaker
Attach to a wall without the base and the stand
∫
To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g.
[XH75]
Front speaker
J
65 mm
K
349 mm
L
110 mm
M
51 mm
N
51 mm
Wall
Screw eye
(not supplied)
String (not supplied)
Less than
10 cm
[XH75]
Reattaching the speaker cable
Insert the cable
from the bottom.
Pull out the cable
through the hole.
Leave about
120 mm.
20
SC-XH70-75 EP_RQT9594-R_eng.book Page 20 Wednesday, December 14, 2011 9:05 AM
