Before using
10
RQT5539
A
B
C
Turning the demo function off
A
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Turn this function off to get the most from the eco mode (see below).
Press and hold [-DISP/–DEMO] until “NO DEMO” is dis-
played.
The display changes each time the button is held down.
NO DEMO (off)
↔
DEMO (on)
ECO mode
B
When this mode is used, the display remains blank when the unit is
switched to standby mode and the power consumed is reduced to
0.25 W from a maximum of 18 W.
The mode is set to on at the time of purchase.
Condition in standby
ECO mode
Display
Power consumption
off
clock
18 W
on
blank
0.25 W
Note
To get the most from this mode, turn the demo function off or set the
clock.
Turning ECO on and off
Press [
f
/
7
, POWER] to turn the unit on.
Press [MODE].
The current ECO mode is displayed. Press again to change the mode.
The display changes each time the button is pressed.
NORMAL (off)
↔
ECO (on)
The eco mode can be turned on if the unit is in standby but it cannot
be turned off.
Conserving Power
The unit consumes 0.25 W even when it is turned off with [
f
/
7
, POWER]
or Auto-off function and ECO mode is turned on. To save power when
the unit is not to be used for a long time, unplug it from the household
AC outlet. Remember to reset the radio stations and any other memory
items before using the unit again.
Auto-off function
C
by remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for four minutes.
Note
This function does not work if the source is tuner or AUX.
Press [AUTO OFF].
“AUTO OFF” is shown on the display.
To cancel
Press [AUTO OFF] again to clear “AUTO OFF” from the display.
For your reference
The setting is maintained even if the unit is turned off. When the unit
is turned on again, “AUTO OFF” is displayed and the unit functions as
described above.
“AUTO OFF” disappears from the display if either tuner or AUX is
selected as the source but continues to function normally.
“AUTO OFF” remains displayed if CD or tape is selected as the source.
