VQC7400
F1209RE0
1
2
1
2
3
4
1
2
3
1
FRONT
Lch
→
SETUP MIC
Easy Setting Guide
The order of setting
Prepare the speakers
Place the speakers
Refer to the rear label of the speaker before connecting the
corresponding cable.
Verify the type of speaker with the label on the rear of the
speaker.
Speakers
Front speakers
Front/Avant
Center speaker
Center/Centre
Surround speakers
SURROUND/AMBIOPHONIE
Blu-ray Disc Home Theater Sound System
Model No.
SC-BT730
e.g.,
Prepare the
speakers
See below
Place the
speakers
See below
Connect the
cables
See over
Turn on the system
See over
Smart setup
See Smart setup screen
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker Lch
PUSH!
Front
speakers
Surround
speakers
Center
speaker
Subwoofer
Step 3
Step 4
Step 1
Step 2
WHITE
White
Blue line
Back of the base
Pull the cable straight
along the line and slide
into the groove.
Tighten securely.
Leave about 80 mm (3
5
/
32
)
Tighten securely.
Press into the groove.
Front speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GRAY
GREEN
PURPLE
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!
Auto speaker setup microphone (included)
Place the Auto speaker setup microphone at the actual seating
position. (At ear level when seated.)
Main unit’s front panel
GREEN
C
GRAY
RS
RED
R
WHITE
L
PURPLE
SW
BLUE
LS
Wireless system
Surround speakers
(LS, RS)
Recommended
Front speakers
(L, R)
60
120
VQC7400̲eng.indd 2-3
VQC7400̲eng.indd 2-3
2009/12/24 13:05:53
2009/12/24 13:05:53
