46
VQT2W23
Video is not output.
≥
Set the “High Clarity Sound” in the
Playback
menu to “Off” to
use the VIDEO OUT terminal. (
>
37)
Video is not output in high-definition.
≥
Confirm that “HDMI Video Format” in the Setup menu is set
properly. (
>
41)
3D video is not output.
≥
Are the settings on this unit and the TV correct? (
>
17)
3D video is not output correctly as 2D.
≥
Is the “Playback method for 3D disc” set to “2D Playback”?
(
>
39)
≥
Discs that have recorded titles with Side by side (2 screen
structure) which can be enjoyed in 3D are played back in
accordance with the settings of the TV.
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
≥
Confirm the “TV Aspect” is set properly. (
>
41)
≥
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (
>
28) on the unit is also
possible.)
[For[the[United[Kingdom[and[Republic[of[Ireland[
After choosing “Home Cinema” in “Speaker Selection”
with the TV’s remote control, the TV’s input selection also
changes.
≥
Disconnect the HDMI cable from the TV and reconnect it to a
different HDMI IN terminal.
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
≥
Check connections to speakers and other equipment. (
>
12,
13,15
s
20)
≥
Ensure the speaker settings for your speakers are correct. (
>
43)
≥
To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. (
>
41)
≥
When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
≥
Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (
>
37)
≥
Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
≥
The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
j
If the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL” terminal. (
>
17, 32)
≥
TR
No surround sound.
≥
Press [SURROUND] to select a surround effect. (
>
26)
≥
[BTT755[for[Australia[and[New[Zealand]
Ensure that the surround selector switch is set in the centre
position. Then, turn the wireless system off and then back
on.
≥
(When using the 7.1ch speaker system)
Audio is not available from the surround back speakers even
though Dolby Pro Logic II turns on.
Cannot switch audio.
≥
When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or
“MPEG Audio” to “PCM”. (
>
40)
No sound from the TV.
≥
Press [EXT-IN] to select the corresponding source. (
>
25)
≥
The ARC (Audio Return Channel) function is not available.
Instead, use an optical digital audio cable or an audio cable
to have the TV sound. (
>
16, 17)
≥
If the TV is not ARC compatible and only the HDMI connection
is used, an extra audio connection is necessary (
>
16, 17).
Cannot charge or operate.
≥
Check that the iPod/iPhone is connected firmly. (
>
34)
≥
The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
Cannot display iPod/iPhone videos/photos on the TV.
≥
Make sure that TV is connected to the VIDEO OUT terminal
on this unit. (
>
16)
≥
Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI input.
≥
When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[START] is pressed.
j
Re-select the TV’s VIDEO IN input channel.
Distorted sound or noise is heard.
≥
Adjust the position of the antenna.
≥
Use an outdoor antenna. (
>
18)
A beat sound is heard.
≥
Try to keep a certain amount of distance between the
antenna and the TV.
Sound
iPod/iPhone operation
Radio
SCBTT755_350EBGN_VQT2W23.book 46 ページ ２０１０年６月１８日 金曜日 午後４時５８分
