Simple setup
RQT6220
6
Speakers
STEP
3
Sheet of speaker-
cord stickers
1
Attaching the stickers to the speaker cords
Attach the speaker-cord stickers to make connection easier.
Attaching to a wall
Front and surround speakers can be attached to a wall.
Set the speaker onto screw and slide through bracket to lock into
position.
Note
The wall or pillar on which the speakers are to be attached should
be capable of supporting 5 k
g
(11 Ib.) per screw.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and setup com-
binations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem. If it persists, move the speakers further away from the
television.
Notes on speaker use
≥
You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
≥
Reduce the volume in the following cases to avoid damage.
–When playing distorted sound.
–When the speakers are receiving howling from a microphone
or record player, noise from FM broadcasts, or continuous sig-
nals from an oscillator, test disc, or electronic instrument.
–When adjusting the sound quality.
–When turning the unit on or off.
Caution
≥
Use the speakers only with the recom-
mended system. Failure to do so may lead
to damage to the amplifier and/or the
speakers, and may result in the risk of fire.
Consult a qualified service person if dam-
age has occurred or if you experience a
sudden change in performance.
≥
Do not attempt to attach these speakers to
walls using methods other than those de-
scribed in this manual.
30–35 mm
(1
3
⁄
16
q
–1
3
⁄
8
q
)
7.5–9.5 mm
(
19
⁄
64
q
–
3
⁄
8
q
)
7–9 mm
(
9
⁄
32
q
–
23
⁄
64
q
)
5
CENTER
3
SURROUND
Lch
1
FRONT
Lch
6
SUB
WOOFER
4
SURROUND
Rch
2
FRONT
Rch
1
Front (L)
3
Surround (L)
5
Center
e.g.
1
Front (L)
2
Front (R)
4
Surround (R)
6
Subwoofer
Screw
(not included)