2
2
1
2
-/
*
1
Î
1
2
2
1
Cable
Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do
not crease), pass the folded portion through the hole,
and then pull the rest of the cable through the base.
2 Front speakers
2 Stands
(with cable)
2 Bases
6 Screws
Included parts to be used
2 Sliders
For assembly, use a Phillips-head screwdriver.
Make sure you have all the indicated components before starting assembly, positioning, and connection.
There is no difference between the right and left speakers and stands.
For optional wall mount, refer to back cover.
Preparation
Attach the stand to the base.
Insert the stand into the base
while gently pulling on the end
of the cable.
Base
Cable
The speaker height
can be adjusted.
Min:
110 cm (43
1
/
4
)
Max:
135 cm (53
5
/
32
)
Attach the speaker to the stand.
Feed the speaker cable (the shorter part) into the
bottom of the speaker and through the slot at the rear.
Thread the cable through the middle hole of the slider and
fasten with the two screws.
Cable
Stand
Speaker
Cable
Slider
Screws
Tighten securely.
Large hole
Rounded side
While pulling the speaker cable up through the slot,
slide the speaker stand into the bottom of the speaker.
Front speaker assembly
Place the polyfoam underneath the speaker for stability while attaching the speaker to the stand.
Polyfoam
RQT8656-P.indd 2
RQT8656-P.indd 2
2006/02/28 16:52:08
2006/02/28 16:52:08
