7
Chapter 7 Menu description tables
103
The underlining in the variable range column indicates the setting in the preset mode.
7-8-7 TC/UB
Item/
Data storage
Variable
range
Remarks
UB MODE
USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN
For selecting the UB mode.
USER:
Selects the UB value set in the LCD
section.
TIME:
Selects the local time (hour, minute,
second).
DATE:
Selects the local date and time (last 2 digits
of year, month, date, hour)
EXT:
When CAM or VIDEO is selected as the
REC SIGNAL menu item setting on the
<SYSTEM MODE> screen, the user bits of
the signal supplied to the TC IN connector
are used as the reference.
When 1394 is selected, user bits of the
signal supplied to the DVCPRO connector
are used as reference.
If the user bits cannot be read, the user bits
which are set in the unit are retained.
TCG:
Inputs the TCG value unchanged.
FRM RATE:
Selects the same camera shooting data
(frame rate, etc.) as the VAUX UB (VITC
UB).
REGEN:
Reads the value recorded on the tape and
then continues to record from that value.
7-8-6 MIC/AUDIO2
WIRELESS WARN
ON
OFF
For selecting whether or not to output
warnings when the reception of the wireless
receiver is poor.
Item/
Data storage
Variable
range
Remarks
FRONT MIC
POWER
ON
OFF
For selecting the phantom power supply for
the front microphone.
REAR MIC POWER
ON
OFF
For selecting the phantom power supply for
the rear microphone.
AUDIO OUT
ON
OFF
For setting the audio output circuit.
OFF:
The power to the output circuit is shut
down, and the signals of the circuit are
not output.
ON:
The signals of the audio output circuit
are output.
MONITOR SELECT
SDC905
STEREO
MIX
For selecting the format of the signals to be
output to the monitor.
FRONT MIC LEVEL
–40dB
–50dB
For selecting the input level of the front
microphone.
REAR MIC CH1
LVL
–50dB
–60dB
For selecting the input level of the rear
microphone.
REAR MIC CH2
LVL
–50dB
–60dB
For selecting the input level of the rear
microphone.
REAR LINE IN LVL
0dB
+4dB
For selecting the rear line input level.
AUDIO OUT LVL
0dB
+4dB
For selecting the rear audio output level.
HEADROOM
18dB
20dB
For setting the headroom (reference level).
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
VITC UB MODE
USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN
For selecting the VAUX TC (VITC) UB mode.
USER/EXT:
When EXT is selected as the UB MODE
setting, the value concerned applies; with
any other setting, the USER value set by
UB is recorded.
TIME:
The local time (in hours, minutes and
seconds) is selected.
DATE:
The local date (last 2 digits of AD
year, month, day and hours) is
selected.
TCG:
The TCG value is used as is for UB.
FRM RATE:
The same shooting information (frame
rate, etc.) of the camera as for VAUX UB
(VITC UB) is selected.
REGEN:
The value recorded on the tape is
read and recorded continuously.
C U F
