background image

3

LSQT1214

Indemnity concerning recording 
content

The manufacturer shall in no event be liable for 
the loss of recordings due to malfunction or 
defect of this unit, its accessories or recordable 
media.

Carefully observe copyright laws

Recording of pre-recorded tapes or discs or 
other published or broadcast material for 
purposes other than your own private use 
may infringe copyright laws. Even for the 
purpose of private use, recording of certain 
material may be restricted.

SDHC Logo is a trademark.

miniSD Logo is a trademark.

The Movie Camera uses copyright-protected 
technologies and is protected by the patented 
technologies and intellectual properties of 
Japan and the U.S. To use these copyright-
protected technologies, authorization of the 
Macrovision Company is required. It is 
prohibited to disassemble or modify the Movie 
Camera.

Manufactured under license from Dolby 
Laboratories.
Dolby and the double-D symbol are 
trademarks of Dolby Laboratories.

LEICA is a registered trademark of Leica 
Microsystems IR GmbH and DICOMAR is a 
registered trademark of Leica Camera AG.

Microsoft

®

, Windows

®

 and DirectX

®

 are either 

registered trademarks or trademarks of the 
Microsoft Corporation in the United States and/
or other countries.

IBM and PC/AT are registered trademarks of 
International Business Machines Corporation 
of the U.S.

Celeron

®

,

 

Intel

®

 and Pentium

®

 are the 

registered trademarks or trademarks of the 
Intel Corporation in the United States and other 
countries

AMD Athlon and AMD Duron are trademarks of 
Advanced Micro Devices, Inc.

Sound Blaster is a trademark of Creative 
Technology Ltd.

Microsoft product screen shot(s) reprinted with 
permission from Microsoft Corporation.

Other names of systems and products 
mentioned in these instructions are usually the 
registered trademarks or trademarks of the 
manufacturers who developed the system or 
product concerned.

These operating instructions are designed for 
use with models SDR-H250 and SDR-H20. 
Pictures may be slightly different from the 
original.

The illustrations used in these operating 
instructions show model SDR-H250, however, 
parts of the explanation refer to different 
models.

Depending on the model, some functions are 
not available.

Features may vary, so please read carefully.

LSQT1214_GN.book  3 ページ  2007年2月8日 木曜日 午後8時50分

Summary of Contents for SDR-H20GN

















































































































Reviews: