47
LSQT1346
1
Select [
] with the joystick, and
fill the screen with a white
subject.
2
Select [
] with the joystick.
When the [
] display stops flashing, the setting
is complete.
≥
If the [
] display continues flashing, the white
balance cannot be set because it is too dark. In
this case, use the automatic white balance.
∫
White balance sensor
A
The white balance sensor detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
≥
When the unit is turned on with the lens cover
closed, the automatic white balance
adjustment may not function properly. Please
turn the unit on after opening the lens cover.
≥
When the [
] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥
When setting both the white balance and the
iris/gain, set the white balance first.
To set the white balance manually
MNL
BACK
BACK
BACK
BACK
MNL
BACK
BACK
BACK
A
SDR-H60&40EP-LSQT1346_eng.book 47 ページ ２００８年２月２５日 月曜日 午後３時３３分
