114
VQT3E42
≥
/
To physically
format an SD card, connect the unit via
the AC adaptor, select [SETUP]
#
[FORMAT CARD] from the menu, and
then press and hold the delete button on
the screen below for about 3 seconds.
When an SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
≥
/
To physically
format an SD card, connect the unit via
the AC adaptor, select [SETUP]
#
[FORMAT MEDIA]
#
[SD CARD]
from the
menu, and then press and hold the delete
button on the screen below for about
3 seconds. When an SD card data
deletion screen appears, select [YES],
and then follow the on-screen instructions.
≥
Please look after the data in an SD card
carefully.
≥
When the LCD monitor gets dirty, wipe it
with a soft cloth such as eye glass cleaner.
≥
In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth such
as eye glass cleaner.
≥
When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the power is
turned on. The normal brightness will be
restored when the unit’s internal
temperature rises.
SDR-S70
SDR-S71
SDR-T70
SDR-H100
LCD monitor
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
123,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
SDR-H100&S71&S70&T70-VQT3E42_eng.book 114 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
Summary of Contents for SDR S7 - Flash Memory Camcorder
Page 131: ...131 VQT3E42 ...
