SF4C Safety light curtain
2.5 Mounting
29
1.
2.
3.
Procedure
1. Remove the M3 countersunk head screw with anti-loosening agent (length
4mm) which is attached to the back of the device
SF4C
M3 countersunk head screw with
anti-loosening agent (length 4mm)
2. Mount the multifunctional bracket using the M3 countersunk head screw
with anti-loosening agent (length 4mm) (accessory of multifunctional
mounting bracket). The tightening torque should be 0.3N·m
M3 countersunk head screw with
anti-loosening agent (length 4mm)
(Accessory of
multifunctional mounting
bracket)
Multifunctional mounting
bracket (MS-SFC-3, optional)
Part B
Part A
3. Remove the two of the hexagon-socket head bolts for beam-axis alignment
M3 (length 5mm) on part A.
Part A
Part B
Hexagon socket bolt for
beam-axis alignment
4. Separate part A from part B and change the direction of the part A of the
multifunctional mounting bracket.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
mailbox@sentronic.com
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG