4
Listening to CDs
The letters such as
B
in the various illustrations refer to the descriptions in the “Location of Controls” section. (See page 2.)
Other Play Methods
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Changing the sound quality
Press during play or stop mode.
Each time the button is pressed;
S-XBS:
Select this setting to boost the low frequency range re-
sponse.
Note
!
The setting returns to S-XBS when you disconnect the
power source.
B
I
Anti-Skip System
This system deals with skipping in a variety
of ways:
≥
An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥
A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥
An anti-skip memory (max. 48 seconds) fills in inter-
ruptions caused by bumps and vibrations.
The anti-skip system works automatically while the
unit is on and cannot be canceled.
C
S-XBS
AUTO
RANDOM
MEMORY
FM
AM
VOL
MONO
CITY
TUNED
SORRY
1
M
E
Note
!
≥
While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥
The anti-skip memory compresses digital signals.
When bumps continue repeatedly
The message “SORRY” appears on the display and
sound is interrupted.
“S-XBS”
>
“ ” (Cancel)
F
S-XBS
C
S-XBS
Repeat play/Random play
Press during play or stop mode.
Each time the button is pressed;
1
`
(1-track repeat)
One track is repeated.
`
(All-track repeat)
All the tracks on the disc are repeated.
RANDOM (Random)
The tracks play once each in random order and
then play stops.
RANDOM,
`
(Random repeat)
The tracks play repeatedly in random order.
When pressed during program play
Each time the button is pressed;
1
`
M (1-track repeat)
One track is repeated.
`
M (Memory repeat)
The programmed tracks are repeated.
Note
!
≥
You can select the first track to play in random play
and random repeat play by pressing [
9
/
i
] while
the disc is stopped. All the tracks are played.
≥
You cannot select random play or random repeat play
during program play.
≥
The resume function does not work when random or
random repeat are on.
≥
The mode is canceled when you disconnect the power
source.
C
RANDOM
1
S-XBS
“1
`
”
#
“
`
”
#
“RANDOM”
#
“RANDOM
`
”
^ ------------=
“ ”(Cancel)
( ______ --}
C
S-XBS
1
M
“1
`
M”
#
“
`
M”
#
“M”(Cancel)
^---------------------------------------=}
J
FM RECEPT
CITY/NOR
MODE
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Register in sequence.
(The indication “M” and the programmed sequence ap-
pear on the display.)
3
Repeat steps 1 and 2 to program all
the desired tracks.
4
∫
To program the same track in the se-
quence more than once
∫
After step 2, press [MEMORY/RECALL] the desired
number of times.
∫
If “
'
” is displayed
∫
No more tracks can be programmed.
∫
To confirm the contents of the program
∫
Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on
the display in sequence.)
∫
To delete the entire programmed se-
quence
∫
Press [
∫
, OPR OFF].
Note
!
The repeat and random play modes are canceled after
steps 1 and 2.
C
MEMORY/
RECALL
B
I
