background image

3

TQBS0399

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug 

for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the 

replacement fuse has a rating of 5-ampere and that it is 

approved by ASTA or BSI to BS1362.

Check for the ASTA mark 

Ï

 or the BSI mark 

Ì

 on the body of 

the fuse.
If the plug contains a removable fuse cover you must ensure 

that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a 

replacement cover is obtained.

A replacement fuse cover can be purchased from your local 

dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC 

mains plug (figures A and B). Confirm the AC mains plug fitted 

and follow the instructions below.

Illustrations may differ from actual AC mains plug.
1.  Open the fuse cover with a screwdriver.

2.  Replace the fuse and close or attach the fuse cover.

Accessories

Check the supplied accessory before using this system.

1 Remote control (with a battery)

(N2QAYC000133)

1 AC mains lead

(K2CT2CA00007)

1 AC adaptor

(TXH0016AA)

• Product numbers are correct as of June 2020. These may be 

subject to change.

• Do not use AC mains lead and AC adaptor with other 

equipment.

• Do not use any other AC mains lead and AC adaptors except 

the supplied one.

Table of contents

Safety precautions ..............................................2
Accessories.........................................................3
About Bluetooth

®

.................................................3

Control reference guide.......................................4
Connections ........................................................6
Using this system ................................................7
Bluetooth

®

 connection .........................................8

Troubleshooting...................................................8
Unit care..............................................................8
Specifications ......................................................9
License..............................................................10

About Bluetooth

®

Frequency band used

This system uses the 2.4 GHz frequency band.

Certification of this device

• This system conforms to frequency restrictions and has 

received certification based on frequency laws. Thus, a 
wireless permit is not necessary.

• The action below are punishable by law in some countries:

– Taking apart or modifying the unit.
– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth

®

 

equipped devices is not guaranteed.

• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it 

can fail to connect or some operations can be different.

• This system supports Bluetooth

®

 security features. But 

depending on the operating environment and/or settings, 
this security is possibly not sufficient. Transmit data 
wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth

®

 device.

Range of use

Use this device at a maximum range of 10 m.
The range can decrease depending on the environment, 
obstacles or interference.

Interference from other devices

• This system may not function properly and troubles such as 

noise and sound jumps may arise due to radio wave 
interference if this system is located too close to other 
Bluetooth

®

 devices or the devices that use the 2.4 GHz band.

• This system may not function properly if radio waves 

from a nearby broadcasting station, etc. are too strong.

Intended usage

• This system is for normal, general use only.
• Do not use this system near equipment or in an environment 

that is sensitive to radio frequency interference (example: 
airports, hospitals, laboratories, etc).

Caution for AC Mains Lead

Fuse cover

Figure A

Figure B

Figure A

Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

Panasonic bears no responsibility for data and/or information 
that is compromised during a wireless transmission.

SC-HTB01_EB_TQBS0399.book  3 ページ  2020年6月25日 木曜日 午前9時55分

Summary of Contents for Sound Slayer SC-HTB01













Reviews: