background image

Other

22

License

Specifications

The Bluetooth

®

 word mark and logos are registered trademarks 

owned by Bluetooth SIG, Inc. and any use of such marks by 

Panasonic Corporation is under license.

Other trademarks and trade names are those of their respective 

owners.

For DTS patents, see http://patents.dts.com..

Manufactured under license from DTS, Inc.

DTS, the Symbol, DTS and the Symbol together, DTS:X, the DTS:X 

logo, Virtual:X, and the DTS Virtual:X logo are registered trademarks 

or trademarks of DTS, Inc. in the United States and/or other 

countries.

© DTS, Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Vision, Dolby Atmos, Dolby Audio, and the double-D 

symbol are trademarks of Dolby Laboratories.

The product with the Hi-Res Audio logo is conformed to 

Hi-Res Audio standard defined by Japan Audio Society.

The logo is used under license from Japan Audio Society.

The terms HDMI and HDMI High-Definition Multimedia Interface, and 

the HDMI Logo are trademarks or registered trademarks of HDMI 

Licensing Administrator, Inc. in the United States and other countries.

HDAVI Control

TM

 is a trademark of Panasonic Corporation.

SOUNDSLAYER Logo is a trademark of Panasonic Corporation.

Other system names and product names appearing in this document 

are in general the registered trademarks or trademarks of the 

respective developer companies.

Note that the 

TM

 mark and 

®

 mark do not appear in this document.

GENERAL

Power supply

DC 19.5 V 3.34 A

(AC adaptor)

AC 100 V to 240 V, 

T

1.4 A, 50/60 Hz

Power consumption

Approx. 24 W

Power consumption in standby mode

When “Network Standby”* is “OFF”

Approx. 0.22 W

When “Network Standby”* is “ON”

Approx. 0.25 W

Dimensions (W

k

H

k

D)

 

Approx. 430 mm (16 

15

/

16

″)

k

52 mm (2 

1

/

16

″)

k

130 mm (5 

1

/

8

″)

(Including protrusion)

 

Approx. 431 mm (17″)

k

52 mm (2 

1

/

16

″)

k

132 mm (5 

1

/

4

″)

Mass (Weight)

 

Approx. 1.8 k

g

 (4.0 lbs)

Operating Condition

Operating temperature range

0

o

C to

 r

40

o

C (

r

32

o

F to

 r

104

o

F)

Operating humidity range

35 % to

 

80 % RH (no condensation)

AMPLIFIER SECTION

RMS OUTPUT POWER (non-simultaneous drive)

Total RMS OUTPUT POWER

80 W

FRONT SPEAKER (L/R)

25 W

i

25 W (1 kHz, T.H.D. 10.0 %, 6

, 20 kHz LPF)

SUBWOOFER

30 W (100 Hz, T.H.D. 10.0 %, 3

, 20 kHz LPF)

FTC OUTPUT POWER

FRONT SPEAKER (L/R)

4 W

i

4 W (1 kHz, T.H.D. 1.0 %, 6

, 20 kHz LPF)

SUBWOOFER

21 W (100 Hz, T.H.D. 1.0 %, 3

, 20 kHz LPF)

Summary of Contents for Sound Slayer SC-HTB01


























Reviews: