72
5-4
Preparing for Audio Input
Take the following steps to prepare the camera for connecting
audio input devices.
5-4-1
When Using the Front Microphone
The AJ-MC700P microphone kit (optional) includes a
microphone that can be mounted on the camera.
1
Open the microphone holder.
2
Mount the microphone and tighten the clamping screw.
3
Connect the microphone cable to the MIC IN jack on the
camera.
4
Set the AUDIO IN switch to [FRONT] depending on the
audio channel to be recorded.
5-4-2
When Using a Wireless Receiver
Using an External Wireless Receiver
Mount a wireless receiver when using a wireless system.
1
Mount the wireless receiver on the camera attachment.
2
Align the grooves in the camera attachment with the pins on
the unit (e.g., the battery case), and mount the wireless
receiver.
3
Connect the wireless receiver to the AUDIO IN jack with the
XLR cable.
4
Set the AUDIO IN switch to [REAR] for the channel to which
the XLR cable is connected.
5
Set the LINE/MIC/+48V selector switch on the rear panel to
[MIC].
To remove the wireless receiver, raise the lever on the
bottom of the camera attachment.
<Note>
Please refer to the wireless receiver’s instruction manual for
such information as operation of the wireless receiver.
Clamping Screw
MIC IN Jack
AUDIO IN
Switch
Wireless Receiver
Camera Attachment
XLR Cable
AUDIO IN Jack
Audio Output Jack
AUDIO IN Switch
Summary of Contents for SPX900
Page 117: ...117 9 MEMO...
