Magnet
1
1
9
● Filter screen of condenser
Remove it 1~2 times every month for cleaning. When it is very dirty
,
please use the neutral detergent to clean.
1. Firstly dismount the fastening screw when the baffle is open. The filter
screen can be dismounted by lifting the grilled door.
2. When the filter screen is dismounted, firstly lift it and then take it out.
● Condenser
Clean once every half a year according to the sequences as shown
below.
1. Please unplug the power plug from the power socket.
2. Grasp the bottom on two sides of grilled door, pull forward to make
it slightly rotate, and lift upward to open the grilled door.
3. Use the brush to brush from top to bottom, thoroughly brushing the
dust. If the condenser filter is removed for cleaning, do not directly
touch the condenser fin, which may cause injury.
●Door seal
If continue to use it under the condition that it is stained with lactic acid
bacteria beverage or seasonings, door edge will be damaged. Do not
forget to clean the door edge and the surface contacted with edge.
●After the maintenance completes, the following inspection shall be
made for safety.
1. Whether the power line plug is completely inserted in the power
socket or not. Whether there is abnormal heating phenomenon or not.
2.
IF the supply cord is damaged. It must be replaced by the manufact-
urer, its service agent or similarly qualified persons in order to avold
a hazard.
Ⅴ. Parts
SRR-781HP(AU)
3
3
3
3
12
15
15
3
small net racks
3
big net racks
Support
SRF-781HP(AU)
SRR-1281HP(AU) SRR-1581HP(AU)
SRF-1281HP(AU) SRF-1581HP(AU)
SRR-1881HP(AU)
SRF-1881HP(AU)
SRR-681HP(AU)
SRF-681HP(AU)
12
30
Net rack
1. Free warranty period
：
As the product is used as commercial equi-
pment, warranty period of the complete machine is twelve months
since the day of installation, acceptance and delivery or the day that
the customer begins to use.
2. If the machine fails by complying with the instructions for use and
operative precautions, please dial our toll-free number to report for
repair.
3. Within the warranty period, the company provides free repair for the
products supplied or products of affiliate enterprise. If it cannot be
repaired, new parts shall be timely replaced for free.
4. Within the warranty period, if one of the following circumstances
occurs,we will provide pay-needed maintenance.
①
Components of the product damage or are lost when the customer
is responsible for transportation.
②
Customers carry, install, operate, transform or conduct maintenance
without complying with the Operation Instruction.
③
The machine is left unused for a long time during the warranty period
so that corrosion, damage, loss, etc. generate
④
Due to customer
’
s own causes.
⑤
Failure or damage, such as fire, abnormal voltage, flood etc. caused
by force majeure.
⑥
Do not purchase invoice or change and alter invoices without
permission.
⑦
Consumables are not covered by the warranty, such as fluorescent
lamp, display lamp, starter, battery of temperature display, glass
and so on.
Ⅵ. About After-sale Service
Description
Purchase date and designation
Status of failure
Address, name and
TEL
number
Interview date
Showed on the nameplate
Recorded in the guarantee
Knowing the detailed about
the failure
Let targeted person known
Please let we know your
free time
When request ,please make sure the following items
．．．．．．．．．
．．．．．．．．．
．．．．．．．．．
．．．．
．．．
10
