17
How to Inspect and Care
Please confirm
Power plug
Clean regularly.
Drain path
Request cleaning periodically in one or two-year interval.
Prohibited
CAUTION
Do not clean the path
by the user.
Cleaning may require
disassembly of the
product.
It may lead to injury.
■
After completing cleaning, perform the following inspections.
For any question, please contact the product distributor.
Disconnect the power plug and remove dust from the terminals.
Also clean the dust around the power plug.
After cleaning, wait for 5 minutes before inserting the power plug to the outlet.
< Do not clean dust with a wet hand.>
＊
Depending on the place of installation or environment, dust accumulation is
much faster than expected. Check periodically.
＊
Exclude Page 16 "Drain Outlet"
■
Accumulation in the drain path disturbs
normal flow of defrosted water or condensed
water.
Accumulated water from defrosting and
condensing penetrates the product body to
cause "performance deterioration of heat
insulation material" and leads to "poor cooling"
or current leak in the electrical components.
Cleaning interval varies by product
construction and installed environment.
Use as only a guideline. Contact your
distributor for cleaning of the drain path.
●
Isn't any crack, scratch or trace of rat bite exist on the power cord?
●
Isn't any abnormal heating in the power plug?
●
Is the power plug securely inserted into the power outlet?
