11
4 Specifications
Q
Amplifier Section
RMS output power: Dolby Digital Mode
Front ch (L, R ch)
60 W per channel (6
Ω
), 1 kHz,
10% THD
Subwoofer ch
130 W per channel (8
Ω
), 100 Hz,
10% THD
Total RMS Dolby Digital mode power
250 W
Q
Terminal Section
HDAVI Control
This unit supports “HDAVI Control
5” function.
HDMI AV input (BD/DVD)
1
Input connector
Type A (19 pin)
HDMI AV output (TV (ARC))
1
Output connector
Type A (19 pin)
Digital audio input (TV)
Optical digital input
Optical terminal
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio format
LPCM, Dolby Digital, DTS Digital
Surround™
IR Blaster
Terminal Type
3.5 mm jack
USB Port
For service use only.
Q
General
Power consumption
Main Unit: 34 W
Active subwoofer: 23 W
In standby condition
Main Unit
*1
(When “BLUETOOTH STANDBY” is “OFF”) : Approx. 0.48 W
(When “BLUETOOTH STANDBY” is “ON”) : Approx. 3 W
Active subwoofer
Power switch off : Approx. 0.25 W
The wireless link is not activated : Approx. 1.3 W
Power supply
AC 220 V to 240 V, 50 Hz
Dimensions (W x H x D)
Main Unit
For table top layout
950 mm x 53 mm x 110 mm
For wall mounting layout
950 mm x 110 mm x 57 mm
Active subwoofer
180 mm x 408 mm x 306 mm
Mass
Main Unit
For table top layout
Approx. 2.5 k
g
For wall mounting layout
Approx. 2.6 k
g
Active subwoofer
5.0 k
g
Operating temperature range
0
°
C to +40
°
C
Operating humidity range
20% to 80 % RH
(no condensation)
Q
Speaker Section
Front speakers (Build-in)
Full range
6.5 cm cone type x 1 /ch
Active subwoofer
Woofer
16 cm cone type x 1
Q
Wireless section
Wireless module
Frequency Range
2.40335 GHz to 2.47735 GHz
No. of channels
38
Q
Bluetooth® Section
Bluetooth® system specifica-
tion
Bluetooth
®
Ver. 2.1+EDR
Wireless equipment classifica-
tion
Class 2
Supported profiles
A2DP
Operating frequency
2.4 GHz band FH-SS
Operating distance
10 m (33 ft) Line of Sight
• Specifications are subject to change without notice.
• Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
*1
: When the other connected devices are turned off
Q
System: SC-HTB485EBK
MAIN SPEAKER UNIT : SU-HTB485EBK
ACTIVE SUBWOOFER : SB-HWA480EBK
Q
System: SC-HTB485EGK
MAIN SPEAKER UNIT : SU-HTB485EGK
ACTIVE SUBWOOFER : SB-HWA480EBK
Q
System: SC-HTB485GNK
MAIN SPEAKER UNIT : SU-HTB485GNK
ACTIVE SUBWOOFER : SB-HWA480GNK
Summary of Contents for SU-HTB485EB
