53
9.2.
Active Subwoofer
Note: For description of the disassembly procedures, see the Section 8
9.2.1.
Checking SW SMPS & SW DAMP P.C.B.
Step 1 :
Remove SW DAMP P.C.B..
Step 2 :
Remove SW Power Button P.C.B..
Step 3 :
Remove SW SMPS and SW AC Inlet P.C.B..
Step 4 :
Connect 4P Wire at connector (CN1002) on SW
DAMP P.C.B..
Step 5 :
Connect 10P Wire at connector (CN1) on SW SMPS
P.C.B..
Step 6 :
Connect 3P Wire at connector (CN1003) on SW
DAMP P.C.B..
Step 7 :
Connect 2P Extension Cable (REXX1194) from the
Speaker Cable to connector (CN1005) on SW DAMP P.C.B..
Step 8 :
Upset SW SMPS P.C.B., SW DAMP P.C.B and SW
Power Button P.C.B. as shown.
Step 9 :
SW DAMP P.C.B. and SW SMPS P.C.B. can be
checked as diagram shown.
Summary of Contents for SU-HTB485EB
