49
Special
Features
Special
Features
Personal Computer
1
Turn on your PC.
2
Set the POWER Switch to PC on the Digital Camera.
• The POWER LED lamp lights up.
• LCD Viewfinder is off in PC mode.
3
Connect the Digital Camera to your PC (Windows) using the USB Cable (supplied).
• You can use this Digital Camera as a SuperDisk Drive. (See pages 62, 63, 64, 66.)
• For extended periods of use, it is recommended to use the AC Adaptor (supplied) as a
power source.
• Once the USB driver is installed, the Digital Camera can be connected even after the
PC has been started. The USB Cable (supplied) must be connected as described in
the above steps.
By using the included USB cable to
connect to a PC, you can use your
SuperDisk camera as an external storage
device.
* Data transfer using USB cable is applicable
only for Microsoft
®
Windows
®
98
preinstalled PC with USB port, Windows
®
2000 PC, iMac
®
, iBook
®
, Power Macintosh
®
G3 with USB port or Power Mac™ G4 and
Mac OS version 8.1 or later.
TO PC Terminal
USB Cable (supplied)
USB Terminal
1
2
3
POWER Switch
Connection
Note
Transferring Your Images (Windows)
Transferring Your Images (Windows)
• The USB Driver software for Windows 2000
is currently not available, but will be
available in the future on our website at
www.panasonic.com/palmcam or by
calling 1-800- 272-7033.
SD5000. p47-51.p65
80/01/04, 11:41
49