4.8 Setting ECO Mode
Enabling this mode reduces the amount of electricity consumed by the unit.
Note
•
When ECO mode is enabled, the "Link Speed" setting changes as follows:
–
Link Speed: "10M/Full"
–
PC port cannot be used
•
When the ECO mode setting is changed, the unit will restart.
•
When ECO mode is enabled,
ECO
is displayed while the unit is in standby mode.
*1
The port of the switching hub to which the unit is connected must be 10 Mbps (Fixed) / full duplex.
To set
1.
In standby mode, press
Menu
.
2.
Press [▲] or [▼] to select "ECO Mode"
, and then press
OK
.
3.
Press [▲] or [▼] to select "On"
, and then press
OK
.
*1
The administrator password may be required for this setting. Contact your administrator for further information. For available
characters, see “5.2 Character Table for Administrator Password".
*2
To disable ECO mode, select "Off" (default).
4.8 Setting ECO Mode
82
Operating Instructions
Document Version: 2017-08
Summary of Contents for T-Mobile KX-HDV130
Page 12: ...1 4 For Best Performance 12 Operating Instructions Document Version 2017 08...
Page 113: ...Note Document Version 2017 08 Operating Instructions 113...
Page 114: ...Note 114 Operating Instructions Document Version 2017 08...
Page 115: ...Note Document Version 2017 08 Operating Instructions 115...