background image

4.11  Web User Interface Programming

The product provides a Web-based interface for configuring various settings and features, including some
that are not programmable directly.
The following list contains some useful features that are programmable through the Web user interface.
Contact your administrator for further information.

Language Settings (IP Phone / Web)

User Password (for access to Web user interface)

Default Line for Outgoing

Call Rejection Phone Numbers

Call Features

Enable Anonymous Call

Enable Block Anonymous Call

Enable Do Not Disturb

Enable Call Forwarding Always

Forwarding Number (Always)

Enable Call Forwarding Busy

Forwarding Number (Busy)

Enable Call Forwarding No Answer

Forwarding Number (No Answer)

Ring Counts (No Answer)

Hotline Number

Flexible Key Setting

*1

Program Key

*2

Phonebook Import and Export

DSS Console

*1

*1

KX-HDV230 only

*2

KX-HDV130 only

Note

Each time you want to access the Web user interface, you must enable Web programming
(Embedded Web).

4.12  Updating the Software

Your phone system dealer may offer new features and improve its software version from time to time.
Contact your administrator for further information.

4.11 Web User Interface Programming

94

Operating Instructions

Document Version: 2017-08

Summary of Contents for T-Mobile KX-HDV130





















































































































Reviews: